Hot Dip Galvanised Steel Sheet                        

Part Sheets - Full Sheets - Cut to Size - Pre cut sizes in our Online Store                 Enquire / Request a Quote

Product                      Finish                        Thickness mm                          Max Sheet Sizes mm

Hot Dip Galvanised    Spangled                  0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 3.0              2000 x 1000

 Applying a zinc coating to the surface of mild steel sheets imparts many benefits not least that of corrosion resistance.

The life expectance of galvanise steel sheet is a life time in normal conditions and without any maintenance

Typical Applications of Galvanised Steel Sheet

                                     Automotive components and body panels

                                      Roofing, Wall and Door Cladding

                                      General building components and rainwater goods.

                                      Domestic appliances, electrical goods and agricultural components.

General Properties of Galvanised Steel Sheet

                                       Excellant for cold forming bending and profiling, sheet which is

                                       cut on a guillotine will have bare cut edges but these do not rust as some

                                       zinc is drawn across the cut.

                                      Galvanised steel sheet can be welded but care must be taken to avoid

                                      breathing the fumes which can develop when the zinc burns. 

Note: The degree of spangle varies widely from very little to pronounced as in the picture above.